Linddana TP 200 PTO


The TP 200 PTO is the handyman of tractor-mounted wood-chippers, it can handle most jobs that you will need on a 40-115hp tractor.


  • tractor-mountable
  • hydraulically-fed disc chipper
  • three knives and three anvils in Hardox 400
  • wood chipping of branches and entire trees up to 200mm
  • Cut at an angle of 90 degrees
  • TP Pilot stress control
For more products and accessories, visit the Linddana website


Sometimes the best chipper is the one that is the most versatile. The TP 200 PTO does everything you need from a small scale mobile wood chipper, eating up to 200mm branches and trees, and its for this reason that its Linddana’s best selling model.

Technical Data
Max Wood Diameter 200mm
Max Opening H x W = 210 x 265mm
Operation Return/forward/stop of feed rollers through operating bar (yellow)
Stress Control System TP Pilot for Automatic feeding
Chipper Principle Disc
Cutting Angle 90 degrees
Hopper Placement Parallel
Feed Rollers 2 Horizontal hydraulic rollers
Rotordisc – Diameter 760mm with changeable end sections of ejector wings
Rotordisc – Weight in kg 168
Number of Knives 3pcs.
Chip Size 4-10mm (hydraulic adjustable)
Anvil/Counter Steel 1 Horizontal and 2 Vertical
Power Required 30-85kw (40-115hp)
PTO RPM 540 rpm or 1,000rpm/min.
PTO Shaft Walterscheid 2400 series with freewheel, length = 560mm
3-Point Linkage Category 1
Chip Capacity 6-8 m³/hour (Experience numbers by manual operation)
Weight 700 kg
Tool Kit Yes
Extra Equipment
Speed Up Gear Increases the rpm of the tractor from 540 rpm to 1,000 rpm
Extended Ejector Spout 500 mm vertical • 335 mm vertical • 1,000 mm horizontal
Silverbreakers Type A or B – are used if extra requirements for chip quality is needed
Light Bar Light bar with complete set of rear lights


Related Products

‹ Back to All Linddana Products