Chipstar 355 MX

Australian built 14'' Wood Chipper designed and manufactured in Melbourne.

STANDARD FEATURES

  • JCB Diesel Max Tier 3 108hp
  • Hardened Tool steel knives
  • Fully Rotational Ejector Chute
  • High Performance Twin Rim Disc
  • Lift & Crush System (Twin Hydraulic Ram)
  • Auto Feed, Reverse Auto, and Feed & Leave
  • Variable Roller Feed Speed (Feed Rate Governor)
  • Emergency Stop System (Engine & Rollers)
  • Fail Safe Lockout On Disc Housing
  • Auto Feed Anti Stall System
  • Twin Disc Clutch
  • Easy Access Removable Covers
  • Lockable Instrument Box
  • Rake & Broom Holder
  • Jockey Wheel
  • All Controls On Kerbside
  • Fitted with Safety Knee Bar
Capacity Infeed
Capacity 14″ (355mm)
Feed Rate Variable 40 lineal metres per minute (max)
Log Feed Two hydraulic feed rollers
Large roller 395mm high by 522mm wide
Small roller 216mm high by 522mm wide
Twin ram lift and crush with constant 200psi.
Feed Hopper 850mm high by 1400mm wide with fold down tray (tailgate)
Discharge Chute 360 degree rotational hand crank swivel and lift
Chip Size 16mm variable
Infeed Distance Operator to roller 1540mm
Throat Opening 522mm x 436mm
Roller Blades 12 on top, 16 on bottom Tool Steel
Engine
Standard JCB Diesel Max Tier 3 108hp
Cooling Water Cooled
Fuel Tank 100 Litres fitted with level gauge
Air Cleaner Dual Element with pre cleaner
Mounts Heavy duty vibration mountings
Belt tension by slide rail
Cutting Disc/Housing
Orientation 30° angle cut
Disc Twin rimmed 1020mm diameter.
Bearings Twin spherical rollers (easy to replace)
Knives 4 knives of hardened tool steel, reversible and interchangeable
7 1/4″ long x 4″ wide x 3/8″ thick
Full width cut across face of anvil
Speed 1600rpm
Anvil 4 sided, adjustable/replaceable
Instrumentation
Standard Tach/hour meter, key star switch.
Auto shut-down engine protection.
Options for oil pressure, water temp gauges and ampmeter.
Enclosed in a lockable, kerbside, instrumentation box on anti vibration mounts
Drive System
Standard Twin Disc Clutch
Disc Drive 4 belts
Electrical System
Voltage 12 volt
Lights LED multivoltage tail, brake, indicator, number plate.
Warning becon
Timers Solid state
Braking System
Standard Electric with breakaway switch
Option Air/hydraulic
Hydraulic System
Tank 70 litres fitted with level gauge.
Motor 400cc
Direct Drive Piggy back pump, live hydraulics
Controls
Standard Forward-Neutral-Reverse
Wrap around control bar
Flow control to vary roller speed
Hydraulic lift and crush from both sides
Manual pump up top roller
Auto feed, anti-stall system.
Timed electronic safety switch on disk housing
Options Hydraulic discharge chute
Winch and twin axle
Trailer
Weight 3200kg
Length 5100mm (tailgate closed).
Height 2760mm
Width 2140mm
Operating Height 650mm
Jockey Wheel 800kg retractable
Axle 3.2 tonne single
Wheels 125 x 6.5 2 piece rims
Tyres 750R15(16) 853 (mounted spare wheel)
Rake/Broom Holder Standard
Tow Hitch Ring coupling (options available)
Finish
Colour Powder coated
Warranty/Manuals
Warranty 24 months limited against defective materials, design and workmanship
Manuals Operator, Hazard assessment, maintenance and spares

Related Products

‹ Back to All Chipstar Products