Suitability:
TP 175 MOBILE is a trailer-based twin disc wood chipper with a 4 cylinder 35cv diesel engine and suitable for branches up to 175 mm in diameter.
Features:
- Integrated hydraulic system
- Two knives
- Two anvils in Raex 400 material
- Two hydraulically powered feed rollers
- Powerful spring to hold against moving roller
- Scrapers to secure against accumulation of material at the feed rollers and rotor housing
- Operation bar for start/stop/reverse of the feed rollers
- TP PILOT – stress control system
- Simple mounting of knives – adjustment free
- Lombardini 35 hp Motor
- Rotorlock when changing knives
- Flexible ejector spout
- Stress control system with hour counter
- Simple replacement of wearing parts
- Comprehensive manual with complete spare parts list
For more products and accessories, visit the Linddana website 
Usability:
With an integrated hydraulic system and 2 aggressive feed rollers a strong and problem-free feeding is ensured. Chipping proves efficient based on a fuel consumption level considerably lower than comparable machines in the market.
| Technical Data | |
| Max Wood Diameter | 175mm |
| Max Opening | H x W = 175 x 191 mm |
| Operation | Return/forward/stop of feed rollers through yellow operating bar |
| Chipper Principle | Twin disc with TP OPTICUT |
| Cutting Angle | 90 degrees |
| Hopper Placement | Parallel to driving direction |
| In Feed | 2 Hydraulic feed rollers. Spring compressed of 1 spring 8mm |
| Feed Rollers | Horizontal |
| Rotor disc – Diameter | 600mm |
| Rotor disc – Weight in kg | 69kg |
| Disc Rpm | 1625 rpm |
| Number of Knives | 2 (12x110mm) |
| Chip Length | 4-12mm |
| Anvil/Counter Steel | 1 Horizontal and 1 Vertical |
| Motor | Lombardini, 35 cv diesel, 4 cylinders, water cooled |
| Transmission | TP STARTER Automaic coupling system |
| Motor Stop Indicator in case of: | Too low oil pressure and too high temperature on cooling system |
| No Stress Control | TP PILOT Including hour counter |
| Fuel Consumption | 3.5 Litre/hour |
| Tank Volume | 20 Litres |
| Trailer | one axle trailer (140 km/h) with drawbar and breaks, galvanized |
| Chip Capacity | 5-10 m³/hour |
| Weight | < 750 kg |