Australian built 10" Wood Chipper designed and manufactured in Melbourne.
Features:
- Cummins 85hp Diesel Engine
- Solid Steel Construction
- Hardened Tool Steel Knives
- Fully Rotational Ejector Chute
- High Performance Twin Rim Disc
- Lift & Crush System (Twin Hydraulic Ram)
- Auto Feed, Reverse Auto, & Feed & Leave
- Variable Roller Feed Speed (Feed Rate Governor)
- Emergency Stop System (Engine & Rollers)
- Fail Safe Lockout On Disc Housing
- Auto Feed Anti Stall System
- Centrifugal Clutch
- Lockable Instrument Box
- Easy Access Removable Covers
- Side Mounted Radiator
- Rake Holder
- Tow Hitch
- Jockey Wheel
- Hand Brake
- All Controls On Kerbside
- Fitted with Safety Knee Bar
| Capacity Infeed | |
| Capacity | 10″ (260mm) |
| Feed Rate | Variable 40 lineal metres per minute (max) |
| Log Feed | Two hydraulic feed rollers with twin ram lift and crush 245mm dla x 385mm long Max speed of feed roller: 50 r.p.m |
| Feed Hopper | 825mm high by 1300mm wide with fold down tray (tailgate) |
| Discharge Chute | 360 degree rotational hand crank swivel and lift |
| Chip Size | 16mm variable |
| Infeed Distance | Operator to roller 1500mm |
| Throat Opening | 260mm x 395mm |
| Roller Blades | 10 on top, 12 on bottom Tool Steel |
| Engine | |
| Standard | Cummins 85 hp Diesel engine Full engine cover |
| Cooling | Water Cooled, side mounted radiator |
| Fuel Tank | 60 Litres fitted with level gauge |
| Air Cleaner | Dual Element with pre cleaner |
| Mounts | Heavy duty vibration mounts Belt tension by slide rail |
| Cutting Disc/Housing | |
| Orientation | 30° angle cut |
| Disc | Twin rim 890mm |
| Bearings | Twin spherical rollers |
| Knives | 4 knives of hardened tool steel,reversible and interchangeable 2 of 5 3/32″ long x 4″ wide x 3/8″ thick 2 of 7 1/4″ long x 4″ wide x 3/8″ thick |
| Speed | 1500rpm |
| Anvil | 4 sided, adjustable and replaceable |
| Instrumentation | |
| Standard | Tach/hour meter, key start switch Auto shut-down engine protection Options for oil pressure, water temp gauges and ampmeter. Enclosed in a lockable kerbside instrument box on anti vibration mounts |
| Drive System | |
| Standard | Centrifugal clutch |
| Disc Drive | 4 belts |
| Electrical System | |
| Voltage | 12 volt |
| Lights | LED multivoltage tail, brake, indicator, number plate and warning beacon |
| Timers | Solid state |
| Braking System | |
| Standard | Electric with breakaway switch |
| Handbreak | Standard |
| Hydraulic System | |
| Tank | 50 litres |
| Motor | 400cc |
| Direct Drive | Piggy back pump, live hydraulics |
| Controls | |
| Standard | Forward-Neutral-Reverse wrap around control bar Flow control to vary roller speed Hydraulic lift and crush from both sides Manual pump up top roller Auto feed, anti-stall system. Feed & Leave “try again” system Timed electronic safety switch on disk housing |
| Trailer | |
| Weight | 2500kg |
| Length | 4500mm |
| Height | 2500mm |
| Width | 2040mm |
| Operating Height | 650mm |
| Jockey Wheel | 500kg retractable |
| Axle | 2.5 tonne single |
| Tyres | 215/75R 16 |
| Rake Holder | Standard |
| Tow Hitch | Ring coupling |
| Finish | |
| Colour | Powder coated |
| Warranty/Manuals | |
| Warranty | 24 months limited against defective materials, design and workmanship |
| Manuals | Operator, Hazard assessment, maintenance and spares |